在线字典为您在线查询仪形的词典内容如下，包括仪形的拼音，读音，拼读；仪形的意思和详细释义，仪形的近反义词，仪形的英语翻译，用仪形这个词语怎么造句等内容。
仪形读音/繁体/五笔/英文翻译
| 拼音 | yí xíng | 读音 | 跟我读 |
|---|---|---|---|
| 繁体 | 儀形 | 类型 | 词语大全 |
| 五笔 | 此词无五笔连打 | 平音 | yixing |
| 词性 | 中性 | 语法 | |
| 拼读 | 姨(yi2)|西(xi1)迎(ying2)，形(xing2) | ||
| 英语翻译 | 仪表针形截止阀Meter Needle Type Globe Valves;Globe Valves;Meter Needle Type |
仪形是什么意思？
· 基本释义
1.仪容；形体。
2.谓画其形貌。
3.效法。
4.行法规；做楷模。
5.典范；楷模。
· 详细释义
仪容；形体。
晋 谢灵运 《庐山慧远法师诔》：“从容音旨，优游仪形，广演慈悲，饶益众生。”《文选·王俭＜褚渊碑文＞》：“德猷靡嗣，仪形长递。” 李善 注：“仪形，容仪形体也。” 前蜀 杜光庭 《虬髯客传》：“观 李郎 仪形器宇，真丈夫也。” 明 吴承恩 《陌上佳人赋》：“吾今不暇悉其颜状、意态、风标、仪形。”
谓画其形貌。
《文选·左思＜魏都赋＞》：“丹青炳焕，特有 温室 ，仪形宇宙，歷象圣贤。” 李周翰 注：“言於 温室殿 画天地之形、圣贤之象。”
效法。
《汉书·王莽传上》：“唯陛下深惟祖宗之重，敬畏上天之戒，仪形 虞 周 之盛。” 颜师古 注：“仪形，谓则而象之。”
行法规；做楷模。
《魏书·广平王匡传》：“﹝ 匡 ﹞性耿介，有气节。 高祖 器之谓曰：‘叔父必能仪形社稷，匡辅朕躬，今可改名为 匡 ，以成克终之美。’” 唐 元稹 《赠郑余庆太保》：“况朕小子获承祖宗，实赖一二元老朝夕教诲，以仪形於四方。”
典范；楷模。
晋 陆机 《赠冯文羆迁斥丘令》：“民之肯好，狂狷厉圣；仪形在昔，予闻子命。”《北齐书·王昕传》：“ 元景 位望微劣，不足使殿下式瞻仪形，安敢以亲王僚寀，从厮养之役。” 宋 苏轼 《告文宣王文》：“载空言於典籍，示后世之仪形。”
仪形的近反义词？
仪形近义词：抱歉，查无仪形的近义词
仪形反义词：抱歉，查无仪形的反义词
仪形词语接龙
（~仪形~）在开头的接龙：形状，形容，形象，形成，形式，形势，形体，形胜，形旁，形迹，形似，形色，形貌，形意，形上，形像，形影，形质，形神，形表
（~仪形~）在结尾的接龙：忘形，图形，矩形，情形，变形，字形，外形，扇形，无形，地形，菱形，原形，有形，队形，象形，成形，体形，环形，相形，显形
暂时无法为您进行仪形的词语顺序接龙!
用仪形怎么造句？
您好，暂未查询到仪形造句的内容。
细想仪形执牙尺，回刀剪破澄江色。
Reflect on the implementation instrument shaped teeth feet, back to the scissors break Chengjiang color.
根据桶形基础的特殊形式，采用普通经纬仪对桶基安装误差进行测量是比较困难的。
Because of the special bucket foundation con structure, it is difficult to measure the bucket foundation installation error by using transit.
较为详细地叙述了磁弹性板形检测仪的检测原理及其输出信号的处理方法。
The detecting principle of the magnetoelastic plate shape detector and the processing method for its output signals are described in detail.
根据菲涅耳衍射近似理论，就菲佐干涉仪中的准直镜和标准镜面形误差对透过检测的影响进行了研究。
With the Fresnel diffraction approximation method, the influences of the collimated lens and standard lens surface errors on the transparence testing are analyzed in Fizeau interferometer.
介绍了钳形接地电阻测试仪的测试原理，即在测量时必须要有一个供电流流过的有效的闭合回路。
It describes the measure principle of the clamp grounded resister tester, that is, a effective close loop for current flow is necessary when doing the test.
探讨了复合形优化方法在光谱仪光学系统设计中的可行性和应用方法。
The feasibility and application method of the constrained complex method in designing spectrometers' optical system is discussed.
采取工程测量控制网，对冷却储存环“S”形束流环的基础、坑道墙，采用全站仪按极坐标法进行高精度定位、测控。
With the engineering survey control network, authors made a high precision orientation, measuring and control to basement, mine gallery wall of CSR beam loop by polar coordinates with total station.
重力仪及操作员们都在钟形潜水器内沉到水底。
Gravity meters and their operators were lowered to the water bottom in diving bells.
板形仪是安装在冷轧带材轧机上的检测系统，用于检测带材板形，以控制成品带材的质量，提高经济效益。
The shape meter is a detecting system fixed on the cold rolling strip mill which detects the strip shape to control product quality of strip and improve economic benefit.
当人使用扫描仪时，它会把用户的掌形状和已经注册的掌形记录进行比对。
When a person USES the scanner, it compares the shape of the user's hand to a template recorded during an enrollment session.
通过对经纬仪测绘法1：50 0地形测图过程中各个工序的分析，得出了1：50 0地形图上的点位中误差。
Through the analysis on every procedure of surveying 1:500 topographic map with the method of transit mapping, the position error of 1:500 topographic map is got.
针对大部分刀具预调仪仅能测量刀具轮廓顶点坐标的情况，提出刀形测量的必要性。
The necessity for tool presetting instrument to measure tool shape is suggested most existing tool presetting instruments are only used to measure the coordinate of tool profile top.
在海洋测深中，由于回声测深仪波束角效应的影响，对凸形海底的测量会带来较大的失真。
The record seabed image distorted due to the angular beam-width of echo-sounder in bathymetric, especially for gibbous terrain.
它们的回推谱形大致符合，只是透射光栅谱仪的复原谱的N带相对于O带太小。
The unfolded spectra are roughly alike, but N band lines in the spectra unfolded by TGS are too small in comparison with O band lines.
RSI生物测定技术显著地提高掌形扫描仪性能。
RSI significantly enhanced biometric technology for its hand scanners.
将三维扫描仪测量得到的点云转换成一个实际的3D（三维）多边形模型，以满足高级建模和可视化的需要。 为此提到了转换过程中出现的所有问题和解决方法。
We addressed the problems and solutions of converting a measured point cloud into a realistic 3D polygonal model that can satisfy high modelling and visualization demands.
凸轮轴在检测仪上的安装偏心，影响凸轮轴上凸轮廓形尺寸的测量精度。
The off-centre of the camshaft which is mounted on the detector affects the accuracy of measuring the CAM outline dimension.
介绍了用于热轧带钢板形检测的激光平坦度仪工作原理，开发了平坦度在线连续测量仪及其系统软件。
The work principle of laser flatness gauge for hot-rolling strip steel is introduced. The continuous and online measurement gauge and its system software are developed.
通过对分段辊测张式板形仪板形检测原理的分析发现，分段辊区域宽度对板形检测精度影响较大。
Through analysis of shape measuring principle of tension measuring type shapemeter with segmented rolls, it is found that effect of width of segmented roller on shape detection precision is large.
利用仿形仪扫描模型表面，自动生成描述模型表面的数控指令，实时转存到软磁盘中。
By means of a tracer to scan a model the part program describing the model in detail is automatically produced.
并介绍了合肥国家同步辐射实验室长程面形仪的进展。
Thereafter the progress of the LPT of National Synchrotron Radiation Laboratory (NSRL) in Hefei is introduced.
数字式激光平面干涉仪是用于测量光学元件面形和无焦光学系统波像差的光学仪器。
Digital laser plane interferometer is used to measure the surface of optical components and the wavefront aberration of non-confocal optical system.
在传统刀口仪的基础上，提出一种数字化刀口仪，利用该刀口仪可实现球面光学元件表面面形的定量检验。
A digital knife-edge test system is proposed based on the traditional Foucault tester. Quantitative evaluation for the wavefront of spherical optical elements was achieved by using this test system.
任意角任意等分仪由渐开线板（3），T形线尺（2）和等分刻度线板（1）三个等分角度的零件及辅助零件组成。
The arbitrary angle arbitrarily bisector is composed of an involute board (3), a T-shaped line ruler (2), three equal division angle parts of an evenly divided line plate (1), and an auxiliary part.
在干涉检验过程中，被检元件的面形误差检测精度受到干涉仪系统结构的影响，从而降低测量结果的可靠性。
During the optical interference testing, the measurement accuracy of the tested surface is influenced by the system structure of interferometer, which will decrease the reliability of the measurement.
以六偏磷酸钠为分散剂，使用激光粒度仪对自制针形纳米碳酸钙进行了粒径分析。
The particle size of nano CaCO3 was measured by using the laser particle size analyser, and sodium hexametaphosphate (na (PO4) 6) as dispersant.
针对三维扫描仪所获取的模型数据量庞大，无法直接使用扫描仪的问题，为压缩模型数据量，提出了一种基于三角形折叠网格模型化简方法。
Aimed at the problem that original model data obtained by 3-d scanner are huge and can not be used in real application, a mesh simplify method based on triangle collapse is proposed.
飘波的出现会导致用三角法测量板形时出现误差，而新型截光法板形仪可减轻或消除此误差。
The occurrence of the flying wave can lead to the error in shape control by shape meter using laser triangle method, but the error can be decreased or eliminated by laser capture method.
采用DR-CT系列三维扫描仪，可以迅速的对物体面形进行扫描，获取高密度、高质量的扫描点云。
With utilization of DR-CT series 3D scan digitizer, we can scan the surface of object rapidly, as well as acquire high density & quality point cloud.
采用DR-CT系列三维扫描仪，可以迅速的对物体面形进行扫描，获取高密度、高质量的扫描点云。
With utilization of DR-CT series 3D scan digitizer, we can scan the surface of object rapidly, as well as acquire high density & quality point cloud.
上述为您在线提供的仪形的相关内容全部来自在线汉语词典，希望对您学习仪形这个词语有帮助。