「熔渣」的拼音、意思和解释

admin2021年06月15日词语大全1090

熔渣是一个开头的词语,它的拼音是róng zhā,这篇文章为您提供了熔渣拼音,读音,怎么拼读,同时为了让您在线轻松学习熔渣,我们收录了汉语辞典中熔渣的意义和释义,近义词,反义词,熔渣的五笔怎么打。

在线字典为您在线查询熔渣的词典内容如下,包括熔渣的拼音,读音,拼读;熔渣的意思和详细释义,熔渣的近反义词,熔渣的英语翻译,用熔渣这个词语怎么造句等内容。

熔渣读音/繁体/五笔/英文翻译

拼音 róng zhā 读音 跟我读
繁体 熔渣 类型 词语大全
五笔 此词无五笔连打 平音 rongzha
词性 中性 语法
拼读 日(ri1)翁(weng2),熔(rong2)|知(zhi1)啊(a1),渣(zha1)
英语翻译 n. slag;cinder;clinker;sprue

熔渣是什么意思?

· 基本释义

熔炉中的残渣。

熔渣的近反义词?

熔渣近义词:抱歉,查无熔渣的近义词

熔渣反义词:抱歉,查无熔渣的反义词

熔渣词语接龙

(~熔渣~)在结尾的接龙:油渣,煤渣,豆渣,炉渣,钢渣,麻渣,矿渣,废渣,沉渣,渣渣,药渣,熔渣,灰渣,残渣,胡渣,圪渣,扒渣,翻渣,滤渣,淤渣

暂时无法为您进行熔渣的词语顺序接龙!

用熔渣怎么造句?

您好,暂未查询到熔渣造句的内容。

熔渣覆盖降低了钢液吸氮速度。

The covered slag reduces steel fluid attracting nitrogen speed.

一旦冷却,这种熔渣就可以用来制砖或者铺路。

Once it has cooled, this slag can be used to make bricks or to pave roads.

焊割作业有大量的火星飞溅和

Soldering could cause numerous of spattered sparks and fused dregs.

快速颠倒钢水包从包里倒出

Quick reverse tilt the ladle to remove slag from the pouring spout.

煤灰与融特性存在一定差异。

The fusibility of coal ash was different with that of slag.

冶炼钢铁所产生的粒状(熔渣砂)。

Granulated slag (slag sand) from the manufacture of iron or steel.

有的化成气体跑掉了,有的结成了

Some come off in the form of gases , others collected as slag.

在钢铁冶金过程中,的起泡现象是非常普遍的。

During the steel metallurgy, the phenomena of slag bubbling up is very prevalent.

提出平均发泡寿命作为发泡效果的实验评价指标。

Average foams life, has been presented as criterion to evaluate the foaming behavior in mol-ten slag.

双层药皮焊条的组织继承了外层药皮组织的特征;

The microstructure of slag is inherited the one of outside layer coating slag.

焊后应用不锈钢(不得采用碳钢)扁铲彻底清理熔渣和飞溅。

Application of stainless steel after welding (not by steel) flat shovel thoroughly clean slag and spatter.

中过渡族金属的热力学是冶金基础研究的一个重要方面。

Thermodynamic behaviors of transition metals in molten slags are an important aspect in the fundamental research of metallurgy.

当气体冷却,任何有毒的物质会被封在玻璃状的熔渣中,被安全的填埋。

When the gas is cooled, any hazardous elements in the waste end up sealed in a glassy slag that is safe to put into landfill.

金属和其他不能变成气体的无机材料,则会作为落到箱底。

Metals and other inorganic materials that do not turn into gas fall to the bottom of the chamber as molten slag.

罐内结壳,或脱氧浮扫除问题的几项解决方案正在实验中。

Several approaches to the problem of ladle skull slag or deoxidation-scum removed was being tried.

冶炼钢铁所产生的、浮(粒状熔渣除外)、氧化皮及其他废料。

Slag, dross (other than granulated slag), scalings and other waste from the manufacture of iron or steel.

那些没能转化为气体的金属物和无机物质则被视为,留在炉炉底中。

Metals and other inorganic materials that do not turn into gas fall to the bottom of the chamber as molten slag.

分析了A102不锈钢焊条宏观断口形貌和微观结构对脱性的影响。

The detachability influenced by the macro appearance and the microstructure of A102 slag fracture is analyzed in this paper.

结果表明,降低真空脱氮速率,底吹氩能减少熔渣对真空脱氮的阻力。

It is found that slags decrease the rate of vacuum denitrogenation and vacuum argon blowing decreases the denitrogenation resistance of slags.

脱硫不涉及氧化,而是取决于是否有足够的碱度以及其温度是否足够高。

The removal of sulphuric doesn't involve oxidation, but depends on whether the slag is sufficiently basic and the temperature is high enough.

本技术可适用于各种金属冶炼的熔渣处理,金属和非金属融制粒等生产过程。

The techniques can be applying into the production process of slag disposing of all kinds of metal smelting, metal and nonmetal melting and making grains.

研究了超低碳钢保护的显微组织结构特征,并根据相图分析了熔渣的结晶性能。

The characteristics of the microstructure on super low carbon steel powder has been studied, and the crystallization performance of slag analysed by phase diagram.

通过气化机理分析认为,双高煤采用非熔渣气化、固态排灰的操作方式是可行的。

After analyzing gasification mechanism, it is believed that the operation of dry ash process can be used.

现有的气流床气化技术均为高温气化技术,使国内资源丰富的双高煤无法利用。

All the existing entrained-flow gasification technologies belong to the technology of high slagging temperature process so that domestic resourceful double-high coal cant be used.

金属陶瓷具有良好的耐热态金属及熔渣侵蚀性能,可实现对高温体温度的连续测量。

The cermet had merits of high resistance to corrosion of hot metal and slag, it can be used for continuous temperature measurement.

在宝钢炼钢厂300t RH-KTB上进行了超低碳超低硫钢的预深脱硫试验。

The industrial desulfurization test on 300 t RH-KTB unit at Baosteel using premelted slag was carried out.

通常表现是切割射流的吹力减弱,切口下部残留的熔渣增多,上部边缘过而出现圆角等。

Usually the performance is a cut of the jet blew force is abate, the lower incision of the remainder of the slag increased, the upper edge of the melt and appear a round, etc.

需焊接或热切割的表面应排除所有可能会损坏焊材或母材的杂物,如脂、油、灰尘、水垢、熔渣和油漆等。

Surfaces to be welded or thermally cut shall be cleaned of all foreign material such as grease, oil, dirt, scale, slag and paint that would be detrimental to either the weld or base material.

讨论发泡现象的实质,建立泡沫发泡幅度的理论模型,并结合实验数据讨论了模型参数。

The essential of the foaming phenomenon in molten slag was discussed, and mathematical model of foaming degree was established including the model parameters determined from the experiment data.

讨论发泡现象的实质,建立泡沫发泡幅度的理论模型,并结合实验数据讨论了模型参数。

The essential of the foaming phenomenon in molten slag was discussed, and mathematical model of foaming degree was established including the model parameters determined from the experiment data.

上述为您在线提供的熔渣的相关内容全部来自在线汉语词典,希望对您学习熔渣这个词语有帮助。

发表评论

◎欢迎参与讨论,请在这里发表您的看法、交流您的观点。