进给量是一个开头的词语，它的拼音是jìn jǐ liàng，这篇文章为您提供了进给量拼音，读音，怎么拼读，同时为了让您在线轻松学习进给量，我们收录了汉语辞典中进给量的意义和释义，近义词，反义词，进给量的五笔怎么打。

在线字典为您在线查询进给量的词典内容如下，包括进给量的拼音，读音，拼读；进给量的意思和详细释义，进给量的近反义词，进给量的英语翻译，用进给量这个词语怎么造句等内容。

进给量读音/繁体/五笔/英文翻译

进给量是什么意思？

· 基本释义

也称走刀量。 一般指切削加工中工件或切削工具每旋转一周（如车削）或往返一次（称双行程，如刨削）时，工件或切削工具的相对移动距离。

· 详细释义

也称走刀量。一般指切削加工中工件或切削工具每旋转一周(如车削)或往返一次(称双行程，如刨削)时，工件或切削工具的相对移动距离。

进给量的近反义词？

进给量近义词：抱歉，查无进给量的近义词

进给量反义词：抱歉，查无进给量的反义词

进给量词语接龙

（~进给量~）在开头的接龙：量杯，量词，量子，量筒，量变，量度，量规，量瓶，量刑，量程，量纲，量能，量移，量项，量材，量器，量试，量核，量简，量置

（~进给量~）在结尾的接龙：大量，商量，音量，自量，尽量，容量，掂量，丈量，打量，重量，估量，衡量，能量，当量，较量，电量，胆量，数量，流量，分量

暂时无法为您进行进给量的词语顺序接龙!

用进给量怎么造句？

您好，暂未查询到进给量造句的内容。

滚压过程必须合理控制滚压进给量。

In the rolling process, must be reasonable to control the feed roll.

提高切削速度，降低进给量。

Please increase cutting speed and decrease feed ratio.

研究了切削速度和进给量对加工表面粗糙度的影响。

The influence of cutting speed and feed rate on the surface roughness of machined blade was investigated.

切削用量三要素包括切削速度、进给量和（或叫吃刀量）。

Thee three factors of cutting include cutting speed, feed and the depth of cut.

每行进给量图文影排机或印字机的纸张向前移动一行的数量。

Line feed Advancement of paper in an image setter or printer by one line.

研究了砂轮转速、进给量等工艺参数对石英玻璃表面粗糙度的影响；

The technological parameters such as electrolysis current, the rotation speed of grinding wheel and the feed rate etc, have been optimized.

增加砂轮转速、砂轮摆动和轴向进给量可以提高单晶金刚石的研磨效率。

The increase of the wheel speed, the swing frequency and the feed of shaft direction conduce to improving the grinding efficiency.

老式机床通常是由工人操作并由他们决定机床速度、进给量、切削深度等。

Early machine tools were operated by craftsmen who decided many variables such as speeds, feeds, and depth of cut, etc.

研究分析了不同的切削速度及进给量对叶轮叶片加工的表面粗糙度的影响。

The influence of different cutting speed and feed rate on the roughness of vane's finished surface was investigated and analyzed.

而采用单片机误差补偿系统可以对车刀的进给量进行补偿，提高加工精度。

But the error compensation system of single-chip microcomputer can be employed for the lathe to control the cutter movement, thus increasing the processing precision.

本实用新型主要涉及数控车床，尤其涉及不用代码设置进给量的数控车床。

The utility model mainly relates to a digital control lathe, in particular to a digital control lathe without using code to set the feeding amount.

在此基础上，分析比较了进给量、斜面倾角等参数对斜面钻孔初期受力的影响。

From the model, the effects of the dip Angle and feed rate on thrust force are estimated.

研究用自旋转车刀加工金属纤维时，切削深度和进给量对纤维力学性能的影响。

The effects of the machining depth and the amount of feed on the mechanical properties of the metal fiber to be machined with the self propelled rotary turning tool are researched.

即根据前点位置坐标确定下点位置坐标，然后计算插补周期内两坐标的进给量。

Coordinate of next point was confirmed according to coordinate of front point, and then amount of feed of coordinates was calculated in interpolation cycle.

研究了用自旋转车刀加工金属纤维时，切削深度和进给量对纤维力学性能的影响。

In this paper, effects of depth of cut and feedrate on mechanical properties of metallic fiber are investigated by spinning bit.

改善表面粗糙度应重点从进给量考虑和切削深度考虑，切削速度的影响是比较小；

To improve surface roughness should be considered from VF and cutting depth while the cutting speed is of a little use.

刀头在旋转的同时随螺钉轴向进给，转速与进给量匹配，保证刀头与螺钉不脱节。

The tool head can move along with the screws while rotating and its feeding matches with the rotating speed, thus keep the tool head from skipping from the slot.

高速切削试验表明：切削速度的提高和每齿进给量的减少有利于改善加工表面粗糙度。

The experiment showed that the high quality surface roughness was easy to obtain by increasing the cutting speed and decreasing the feed engagement.

通过改变砂轮转速、砂轮摆动频率、轴向进给量，获得了一些具有对比性的试验结果。

By changing the speed of grinding wheel, its swing frequency and the feed speed of shaft direction, different experiment results were got.

本文论述垂直和横向进给量的公制与英制共用机构，自动快速移动和自动微量进给机构。

This article describes the vertical and cross feed mechanism for both metric and inch system. It is able to perfom automatic, rapid travelling and micro feed.

在优选条件范围内，时变进给量幅度变化对抑振效果的影响比时变进给量频率变化的要大。

The variation of the amplitude has much more important influence on the suppressing chatter effect than that of the frequency.

在本试验参数范围内选取切削参数时，切削速度、进给量取中值有利，切削深度取小值有利。

At the range of the testing parameters it is of advantage to select middle value of feedrate and cutting speed, and smaller value of cutting depth.

因此，一般情况下，我们常常使用较大的进给量进行粗加工，而使用较小的进给量进行精加工。

Therefore, it is generally recommended to use higher feeds for roughing operations and finer feeds for finishing operations.

根据工艺要求进行有关工步程序主轴转速、刀架进给量、刀架运动轨迹和连续越位等项目的预选。

According to the technical requirement on work spindle speed, knife step program feed, knife trajectory and continuous offside project primary.

通过试验，找出了切削深度、切削速度、每齿进给量等切削用量及切出角影响面铣刀寿命的规律。

Tests are conducted to find the rules how such cutting parameters as cutting depth, cutting speed and feedrate per blade as well as the cutting angle affect on the life of face mill.

将正交试验应用到机械加工中，研究了背吃刀量、切削速度和进给量对粗车工效影响的主次顺序。

The primary and secondary factors influence on the efficiency of coarse machinery, which are cutting depth, cutting speed and feed, were studied by applying orthogonal experiment.

将正交试验应用到机械加工中，研究了背吃刀量、切削速度和进给量对粗车工效影响的主次顺序。

The primary and secondary factors influence on the efficiency of coarse machinery, which are cutting depth, cutting speed and feed, were studied by applying orthogonal experiment.

上述为您在线提供的进给量的相关内容全部来自在线汉语词典，希望对您学习进给量这个词语有帮助。